Create your bespoke aluminium pedestrian gate, made to measure for your property. Choose your required width, height, design, RAL colour, slat style and orientation, opening direction, lock or electric strike, handles and optional aluminium posts. If you have a specific design in mind, add your requirements or upload an inspiration image. All our pedestrian gates are manufactured exclusively from high-quality aluminium for a strong, durable and low-maintenance finish. Submit your specifications and our team will review your requirements and provide a bespoke quotation.
Please see our full delivery terms and conditions page (link below) for our delivery terms and conditions.
Delivery is to any mainland UK address in our own truck. Unlike a normal 'courier' our Delivery Team will contact you by phone to arrange a suitable delivery date. The day before the delivery where possible the driver will be in touch again to give a better indication on the time of your delivery.
If in the unlikely event there are any damages or shortages to your delivery, please in the first instance call or email us within 48 hours to report this. Please also take photos of the delivery if possible.
For full delivery and returns terms and conditions please click here
We accept payment by most forms of Credit and Debit Card either via our website.
Payment can also be made by Bacs Bank Transfer.
Watch: How to Measure Your Pedestrian Gate
For Swing Gates:
Width: Total width of the opening. Measured pillar to pillar. If you require Aluminium posts we will add them to the quote, adjusting the width of the gate accordingly.
Height : Actual measurement of the gate from ground to the top most point of the gate. This can be along the hinge side for straight and curved down gates but along the centre for curved up gates. For straight top gates please measure along hinge side from ground to the just under the pillar cap (if any). It is recommended to leave a minimum gap of 100mm between top of the gates and the top of the pillar at hinge side. This is to allow room for hinges and cover.
For Aluminium Posts:
We will add the most appropriate height and thickness for the aluminium posts if required.
Standard width available for painted and wooden finish Aluminium posts is 100mm and 180mm.
RAL 7016 - Anthracite Grey
RAL 5010 - Gentian Blue
RAL 9005 - Jet Black
RAL 1015 - Light Ivory
RAL 6021 - Pale Green
RAL 3004 - Purple Red
YX355S - Rustic Shade
RAL 9016 - Traffic White
RAL 8028 - Terra Brown
RAL 7039 - Quartz Grey
RAL 7045 - Pebble Grey
RAL 9007 - Metallic Grey
RAL 5014 - Dove Blue
All our gates are supplied with NO posts as standard. We assume there are brick pillars to hold the gates in place. The standard size Aluminium posts to hang gates is 100mmx100mm thick. Height would be calculated automatically to match the gates. We allow extra length to cement the posts to the ground. Wooden finish posts would cost 21% more than painted Aluminium posts.
Laser cutting for inbuilt LED lighting and number engraving is possbile only with 180mm posts.
Colour of the posts would be same as the colour of the gates. For wooden finish gates, we choose matching wooden finish posts.
Adding Aluminium posts adds the stability and ease of installation as well as gives your driveway gates the beauty it deserves. You may choose to place the posts between the existing brick pillar or behind them. Either way make sure you measure them right.
Aluminium posts are supplied as pair.
If our standard sizes are not suitable for your project please see your Design Your Own Section or contact us.
Pedestrian gate comes with standard curved handle in the colour of the gate. You may choose alternate designs or pullbar models to best suit your entrance.
Fully closed designs are available in frameless design for contemporary style homes. You may choose to use louvred slats if you need a fully closed gate in windy area.
Slats will be arranged and fitted as requested - horizontal, vertical or angled
Slab pedestrian gates are available in flat, curved, semi and angled designs.
Only flat top styles can be made in frameless and louvred designs.
All other styles can be made with slats arranged vertically, horizontally or angled.
Your request has been sent to our sales team. One of the member of our staff will deal with your request as soon as possible. Standard lead time is 1 - 2 working days for bespoke quote request.
You will be receiving an email with the drawings and quote as requested. Thank You!
Visualise your new gate and fence in the exact dimension and colour before you buy. Please contact us by email with the width, height, colour and gate/fence product name or model and we will send you the drawings. We try our best to process your request in 48 hours, sometimes it takes a bit longer than expected.
Telephone: 0203 372 3321
Email: All drawing requests getdrawings@drivewaygate.co.uk
Email: All other sales enquiries sales@drivewaygate.co.uk
Email: All after sales enquiries aftersales@drivewaygate.co.uk
Address: SMARTECH, 4A The Broadway, Farnham Common, SL2 3PQ
Opening hours: 9.00 - 5.00 Monday - Friday.
HOW TO FIND US
From the M4, exit at junction 6, take the A355 exit to Slough/Central/Windsor/A332 and at the roundabout, take the 3rd exit onto Tuns Ln/A355 and continue to follow A355 for around 3 miles and you can find us on left side, next to Tesco Express.