Slab laser gates are powder coated Aluminium gates available in classic, modern and contemporary design. We are proud to offer designer gates that deliver the beauty your entrance deserve.
Please use this as a guide and not an instruction manual.
We have described in detail, on how to get the gates installed, but we strongly recommend to appoint a professional gate installer to get the job done in perfection.
Our team of expert gate installers does manual and electric gate installation and automation within 50 mile radius from our office (SL2 3PQ).
If you need to speak with us, don't hesitate to phone us on 0203 372 3321. You can email us at sales@drivewaygate.co.uk should you have any queries
We are looking for skilled gate installers all over the UK. If you are one of them and looking for more work, don't hesitate to phone us on 0203 372 3321. You can email us at sales@drivewaygate.co.uk. We offer trade discounts to registered gate installers. So contact us now!!
After you place your order you will be sent an order confirmation from ourselves. We will pass the information to our CAD team to draw the gates/fence as ordered with all the measuremetns exactly marked.
This would help you in building the right driveway or pillars needed and be ready before the gates arrive. You may request to make minor changes if needed at this stage, with written consent. Once the drawing is signed off the order is moved to production and no changes would be accepted.
Our products are large can be heavy and difficult to transport. We have our own vans to transport them. In special circumstances when the gates or fence is longer than 5m we hire third party courier to deliver the item. There is an additional cost involved in this.
Once your product is ready for delivery we will CONTACT YOU BY PHONE or EMAIL to arrange a suitable delivery date (they will not just land like a 'normal courier').
When you are contacted you can discuss any delivery requirements (time requests and access restrictions etc). The delivery drivers also endeavour to call you the day before delivery to confirm and also give you an approximate time of delivery.
We do offer gate, motor and intercom installation services in London, Berkshire, Buckinghamshire, Surrey and Hampshire.
You may find more information on our gate installation here.
Please see our full delivery terms and conditions page (link below) for our delivery terms and conditions.
Delivery is to any mainland UK address in our own truck. Unlike a normal 'courier' our Delivery Team will contact you by phone to arrange a suitable delivery date. The day before the delivery where possible the driver will be in touch again to give a better indication on the time of your delivery.
If in the unlikely event there are any damages or shortages to your delivery, please in the first instance call or email us within 48 hours to report this. Please also take photos of the delivery if possible.
For full delivery and returns terms and conditions please click here
We accept payment by most forms of Credit and Debit Card either via our website.
Payment can also be made by Bacs Bank Transfer.
For Swing Gates:
Width: Total width of the opening. Measured pillar to pillar. If you require Aluminium posts we will add them to the quote, adjusting the width of the gate accordingly.
Height : Actual measurement of the gate from ground to the top most point of the gate. This can be along the hinge side for straight and curved down gates but along the centre for curved up gates. For straight top gates please measure along hinge side from ground to the just under the pillar cap (if any). It is recommended to leave a minimum gap of 100mm between top of the gates and the top of the pillar at hinge side. This is to allow room for hinges and cover.
For Aluminium Posts:
We will add the most appropriate height and thickness for the aluminium posts if required.
Standard width available for painted and wooden finish Aluminium posts is 100mm and 180mm.
RAL 7016 - Anthracite Grey
RAL 5010 - Gentian Blue
RAL 9005 - Jet Black
RAL 1015 - Light Ivory
RAL 6021 - Pale Green
RAL 3004 - Purple Red
YX355S - Rustic Shade
RAL 9016 - Traffic White
RAL 8028 - Terra Brown
RAL 7039 - Quartz Grey
RAL 7045 - Pebble Grey
RAL 9007 - Metallic Grey
RAL 5014 - Dove Blue
All our gates are supplied with NO posts as standard. We assume there are brick pillars to hold the gates in place. The standard size Aluminium posts to hang gates is 100mmx100mm thick. Height would be calculated automatically to match the gates. We allow extra length to cement the posts to the ground. Wooden finish posts would cost 21% more than painted Aluminium posts.
Laser cutting for inbuilt LED lighting and number engraving is possbile only with 180mm posts.
Colour of the posts would be same as the colour of the gates. For wooden finish gates, we choose matching wooden finish posts.
Adding Aluminium posts adds the stability and ease of installation as well as gives your driveway gates the beauty it deserves. You may choose to place the posts between the existing brick pillar or behind them. Either way make sure you measure them right.
Aluminium posts are supplied as pair.
If our standard sizes are not suitable for your project please see your Design Your Own Section or contact us.
Standard double leaf swing gates require motor to be fitted to each of the leaves. This can be underground, overground or built-in to the leaves. Built-in motors are the latest and most popular addition to gate automation. Slad offer 5 year guarantee to built-in Somfy motor.
The Somfy Invisio motorization is installed inside the gate leaves. It is completely hidden and so protected from rain and weather conditions.We offer 5 year warranty on Somy Invisio motor.
24v Nice Underground Gate Opener Kit includes -
2 x BM4024 24v Motors
1 x EPMB pair of Bluebus Photocells
2 x ON2E 433.92 Mhz, 2 channel Transmitters
2 x BMBOX4 Foundation Boxes
1 x OXI 4 channel Receiver
24v Nice Overground Gate Opener Kit includes -
2 x TO4024 24v Motors
2 x ON2 Transmitters
1 x MC824H Control Panel With Plug In Receiver
2 x MOFB Photocells
1 x OXI 4 Channel Receiver
Standard sliding gate with single leaf, cantilever and telescopic can be installed using Nice and Somfy Rolly motors. Double leaf sliding gate requires 2 motors, one for each leaf.
ROBUS Kit 400 (RB400KCE) For sliding gates weighing up to 400 kg, Kit includes -
1 x RB400 Irreversible electromechanical gear motor, with incorporated control unit and OXI plug-in receiver which can be used for connections via Nice BlueBUS
1 x ON2E transmitter 433.92 MHz, 2 channels
1 x EBMP pair of outdoor photocells, for connections via Nice BlueBUS network
1 x EKS key selector ERA series, for outdoor installation
1 x ELDC LED flashing light, 12-36 Vdc, for preset control units
The Somfy Rolly IO motorization is installed on gates measuring up to 6 meters and weighing up to 300 kg. It is completely hidden and integrated into the post and motorizes your gate in style. Watch video on Product FAQ section
Fully closed designs are available in frameless design for contemporary style homes. You may choose to use louvred slats if you need a fully closed gate in windy area.
Slats will be arranged and fitted as requested - horizontal, vertical or angled
Slab modern Fresco gates are available in swing and sliding models.
Only flat top styles can be fitted with laser panels. There are 18 desigs of laser pattern available online.
The gates can be fully laser cut with the chosen pattern or can be a closed design with 30cm wide panel. The laser decorative panel can be added horizontally or vertically. This decorative panel can be fitted close to the handle end or to pillar end. You will be getting the drawings upon sibmitting the quote request.
Your request has been sent to our sales team. One of the member of our staff will deal with your request as soon as possible. Standard lead time is 1 - 2 working days for bespoke quote request.
You will be receiving an email with the drawings and quote as requested. Thank You!
Visualise your new gate and fence in the exact dimension and colour before you buy. Please contact us by email with the width, height, colour and gate/fence product name or model and we will send you the drawings. We try our best to process your request in 48 hours, sometimes it takes a bit longer than expected.
Telephone: 0203 372 3321
Email: All drawing requests getdrawings@drivewaygate.co.uk
Email: All other sales enquiries sales@drivewaygate.co.uk
Email: All after sales enquiries aftersales@drivewaygate.co.uk
Address: SMARTECH, 4A The Broadway, Farnham Common, SL2 3PQ
Opening hours: 9.00 - 5.00 Monday - Friday.
HOW TO FIND US
From the M4, exit at junction 6, take the A355 exit to Slough/Central/Windsor/A332 and at the roundabout, take the 3rd exit onto Tuns Ln/A355 and continue to follow A355 for around 3 miles and you can find us on left side, next to Tesco Express.