Create your bespoke aluminium swing driveway gates, made to measure for your property. Choose your required width, height, design, RAL colour or wood-effect finish, slat style and orientation, installation method, opening direction and optional aluminium posts. Select manual operation or your preferred gate automation, including overground or underground motors. If you have a specific design or requirement in mind, simply add the details to your request. All our swing gates are manufactured exclusively from high-quality aluminium for a strong, durable and low-maintenance finish. Submit your specifications and our team will review your requirements and provide a bespoke quotation.
Please see our full delivery terms and conditions page (link below) for our delivery terms and conditions.
Delivery is to any mainland UK address in our own truck. Unlike a normal 'courier' our Delivery Team will contact you by phone to arrange a suitable delivery date. The day before the delivery where possible the driver will be in touch again to give a better indication on the time of your delivery.
If in the unlikely event there are any damages or shortages to your delivery, please in the first instance call or email us within 48 hours to report this. Please also take photos of the delivery if possible.
For full delivery and returns terms and conditions please click here
We accept payment by most forms of Credit and Debit Card either via our website.
Payment can also be made by Bacs Bank Transfer.
For Swing Gates:
Width: Total width of the opening. Measured pillar to pillar. If you require Aluminium posts we will add them to the quote, adjusting the width of the gate accordingly.
Height : Actual measurement of the gate from ground to the top most point of the gate. This can be along the hinge side for straight and curved down gates but along the centre for curved up gates. For straight top gates please measure along hinge side from ground to the just under the pillar cap (if any). It is recommended to leave a minimum gap of 100mm between top of the gates and the top of the pillar at hinge side. This is to allow room for hinges and cover.
For Aluminium Posts:
We will add the most appropriate height and thickness for the aluminium posts if required.
Standard width available for painted and wooden finish Aluminium posts is 100mm and 180mm.
RAL 7016 - Anthracite Grey
RAL 5010 - Gentian Blue
RAL 9005 - Jet Black
RAL 1015 - Light Ivory
RAL 6021 - Pale Green
RAL 3004 - Purple Red
YX355S - Rustic Shade
RAL 9016 - Traffic White
RAL 8028 - Terra Brown
RAL 7039 - Quartz Grey
RAL 7045 - Pebble Grey
RAL 9007 - Metallic Grey
RAL 5014 - Dove Blue
All our gates are supplied with NO posts as standard. We assume there are brick pillars to hold the gates in place. The standard size Aluminium posts to hang gates is 100mmx100mm thick. Height would be calculated automatically to match the gates. We allow extra length to cement the posts to the ground. Wooden finish posts would cost 21% more than painted Aluminium posts.
Laser cutting for inbuilt LED lighting and number engraving is possbile only with 180mm posts.
Colour of the posts would be same as the colour of the gates. For wooden finish gates, we choose matching wooden finish posts.
Adding Aluminium posts adds the stability and ease of installation as well as gives your driveway gates the beauty it deserves. You may choose to place the posts between the existing brick pillar or behind them. Either way make sure you measure them right.
Aluminium posts are supplied as pair.
If our standard sizes are not suitable for your project please see your Design Your Own Section or contact us.
Standard double leaf swing gates require motor to be fitted to each of the leaves. This can be underground, overground or built-in to the leaves. Built-in motors are the latest and most popular addition to gate automation. Slad offer 5 year guarantee to built-in Somfy motor.
24v Nice Underground Gate Opener Kit includes -
2 x BM4024 24v Motors
1 x EPMB pair of Bluebus Photocells
2 x ON2E 433.92 Mhz, 2 channel Transmitters
2 x BMBOX4 Foundation Boxes
1 x OXI 4 channel Receiver
24v Nice Overground Gate Opener Kit includes -
2 x TO4024 24v Motors
2 x ON2 Transmitters
1 x MC824H Control Panel With Plug In Receiver
2 x MOFB Photocells
1 x OXI 4 Channel Receiver
Fully closed designs are available in frameless design for contemporary style homes. You may choose to use louvred slats if you need a fully closed gate in windy area.
At Slab we manufacture standard sliding gates that runs on track and rollers as well as telescopic, cantilever (free standing) and double leaf sliding gates.
Only flat top styles can be made in telescopic and double leaf and cantilever designs. Telescopic and double leaf sliding are best suited for small driveways. Cantilever gate are usually chosen if you have a slopped driveway. Roller and tracks are made of stainless steel as standard.
Our gates are manufactured with anti-lift mechanism for maximum safety and security.
Swing gates are installed between the pillars as standard. This allows the leafs to open 90 degrees inwards.
In some situations, you may want the gates to be installed behind the pillars. This allows more room for the driveways. The leaves open 90 degree inwards in this mode of installation. In case you need the gates to open more than 90 degree, let us know and we will be able to use 105 degree or 180 opening hinges. Add any information in the Additional Info section of the form.
Hinges used for each of these installation is different and so we need this information to draft the best quote for your driveway gates.
Slab Swing gates are available in flat, curved, semi and dipped designs.
Only flat top styles can be made with unequal leaves.
Your request has been sent to our sales team. One of the member of our staff will deal with your request as soon as possible. Standard lead time is 1 - 2 working days for bespoke quote request.
You will be receiving an email with the drawings and quote as requested. Thank You!
Visualise your new gate and fence in the exact dimension and colour before you buy. Please contact us by email with the width, height, colour and gate/fence product name or model and we will send you the drawings. We try our best to process your request in 48 hours, sometimes it takes a bit longer than expected.
Telephone: 0203 372 3321
Email: All drawing requests getdrawings@drivewaygate.co.uk
Email: All other sales enquiries sales@drivewaygate.co.uk
Email: All after sales enquiries aftersales@drivewaygate.co.uk
Address: SMARTECH, 4A The Broadway, Farnham Common, SL2 3PQ
Opening hours: 9.00 - 5.00 Monday - Friday.
HOW TO FIND US
From the M4, exit at junction 6, take the A355 exit to Slough/Central/Windsor/A332 and at the roundabout, take the 3rd exit onto Tuns Ln/A355 and continue to follow A355 for around 3 miles and you can find us on left side, next to Tesco Express.